Bed squeaks at night: How to solve the problem

Does your bed squeak with every movement and disturb your sleep at night? This is a signal that something is wrong with your bed. Certain components such as the frame, the slatted frame, screws, and mattresses could be the causes. However, it doesn't have to stay this way: We reveal in our guide what exactly triggers the squeaking and how you can eliminate the annoying creaking.

Why does the bed squeak?

A squeaky bed that robs you of sleep is simply annoying, and there are many reasons for sudden unpleasant noises. It may already be worn out due to age and frequent use. Often, nothing helps and a new bed is needed.

Perhaps, however, inferior material was used. Faulty assembly of the bed frame or an uneven floor also cause squeaking. Even innerspring mattresses or springs in the Boxspringbett can be the cause.

But do not worry – there is a solution for every problem! However, before we take action, we should find out exactly where the noise is coming from. With targeted measures, you will eliminate the squeaking. Investigate every single part for this purpose!

What exactly is squeaking on the bed?

To successfully eliminate an unpleasant noise, you must determine which components of the bed are causing it. However, this approach may not work immediately, as you might quickly overlook the cause of the problem during a superficial inspection.

Therefore, we present to you some tips & tricks. This way, both men and women can finally sleep peacefully in bed again.

Why do beds squeak depending on the material?

Often, the material of the bed frame is the cause. Depending on the alternative and condition, squeaking and creaking noises occur for various reasons, which can wake you from sleep. You should pay attention to this:

Metal beds with noise generation

If you sleep in a metal bed, you probably know all too well what it's like when the bed squeaks and creaks. The mere connection of two individual parts that meet is often enough. The material may look chic and modern, but it is particularly susceptible.

Proceed step-by-step in the following manner to resolve issues:

1. Use washers: A screw that is not tightened enough could be the culprit of the squeaking. You can prevent this inconvenience by using special rubber or felt washers between the metal parts at the points of screwing. Caps on the heads help. This reduces friction and minimizes squeaking at the source of the noise.
2. Apply lubricants such as oil (penetrating oil like WD-40) or silicone spray to hinges & Co: These are effective means by which you can successfully reduce squeaking. Cover your mattress beforehand to avoid stains. Then apply a squirt of an option like WD40 to the relevant areas of your bed frame. By lubricating and oiling, you reduce the friction between the metal parts.
3. Use foam tape, adhesive, or mounting strips on the bottom: In some cases, applying sticky foam tape to the outer edges of the bed frame during assembly or repair can help prevent potential squeaking. You can find this and other accessories such as rubber caps for added comfort at the hardware store.

Wood: Quality & Age Crucial

If it is an older model, then the wood may have warped. In this case, often the only solution is to purchase a new one! However, with a newer wooden bed, it could be due to something else. Usually, the squeaking will then stop:

1. Tighten screws and connections: Check all the screws and bolts of your bed at all corners and tighten them if necessary. Also check if the wooden dowels are securely anchored.
2. Apply bar soap, candle wax, paraffin, or wax: If the squeaking persists, simply apply a thin layer of candle wax, soap, or other products to the affected areas and slats. This will reduce the friction between the wooden parts.
3. Use felt pads: Another option is to place felt pads or a liner between the rubbing parts with just a few simple steps. These also minimize friction. It is an affordable option. After installation, you should ensure that the bed is level and the sliders are of equal height.
4. Replace damaged parts of wooden beds: If your bed is very old and the wood is severely deformed, you should replace the affected piece or several parts. Especially the slatted frame slats wear out under constant stress. The tempting alternative is primarily this: a newer model! Feel free to contact us if you are interested in our products for yourself or your children.
5. Check the slatted frame: If the slatted frame is too loose in the frame, it can rub against the bed frame and cause squeaking. Therefore, check the condition and make sure it is firmly in the frame. If it is due to ongoing stresses is damaged or worn, then replacement is the solution.

Padding like a box spring bed or made of cold foam

Even an upholstered and box spring bed sometimes squeaks. But what can you do about it? Often, loose screws and nails or faulty assembly are to blame for the annoying noise. The inner springs of the bed could also be responsible for the squeaking. This is where many people wonder how they can finally get rid of the creaking or groaning. This helps:

1. Check all connections: Before taking any other measures, you should also check if all screws, the feet & Co are securely attached in a box spring bed. Therefore, inspect all connections of the bed and tighten any loose parts.
2. Use cushioning material: If the squeaking noises continue to be audible, you can try to reduce the friction between the different parts of the bed. Materials such as fabric or cork are suitable for this purpose. Simply place them between the parts.
3. Pay attention to the suspension: Especially with box spring beds, sometimes the springs inside are responsible for the squeaking. If you suspect that the suspension is the problem, you should consider a professional inspection. If necessary, replacing the springs may also be required. This is often the reason with children's beds. They are sometimes damaged during play or roughhousing on the mattress.

However, consider: It's not just the material that causes problems.

Inspect the bed frame or structure if beds are squeaking

The bed frame is often the culprit for an unpleasant squeaking. If it is not properly assembled or has loose parts, this can lead to annoying noises. This problem occurs with many beds. However, there are solutions for it.

By ensuring that the frame is properly assembled and tightened, you can prevent the uncomfortable squeaking and enjoy a restful night's sleep.

Slatted frame creaks

A possible cause of annoying squeaking in the bedroom is the slatted bed base. Especially those that have metal parts tend to creak when the slats are loose or have too much play.

In this case, these types of slatted frames rub against the bed frame and cause an unpleasant squeaking. Therefore, you should ensure that the model you choose is made of high-quality materials when you purchase it. Regularly check the condition so that you can enjoy a restful night on your frame.

If you notice any damage to the slatted frame, you should replace it. This will prevent your slatted frame from creaking.

Mattress

Sometimes even our cozy-soft mattress makes life difficult and causes noises. This is often due to the springs wearing out over their lifespan. Then it usually becomes time for a replacement! A drastic step? No - a measure that improves your life. As a temporary measure, you can flip the innerspring with little effort, so you can buy another mattress later and still sleep without noise.

Thus, the heavily stressed springs are located in a different place. The result is a quieter noise, although a squeaking sound may still be heard during movements.

Which bed does not squeak?

One thing in advance: Almost any bed could squeak. There is no universally valid answer to this. Opinions differ on this topic. However, the potential risk depends on these factors:

• Age of the bed
• The type of materials it is made of
• How well it is assembled
• The mattress used (spring mattresses or innerspring mattresses are usually louder)
• The pressure load due to weight

In general, upholstered beds such as a box spring bed and models with a solid frame squeak less. Additionally, the best beds have little space between the corner posts. Improper contact points of the furniture with metal on metal are also disturbing.

By the way: A low-quality spring mattress also leads to more intense squeaking noises. It is best to conduct a test of the various options before purchasing or rely on pure luxury!

Our high-quality wooden and upholstered beds provide relief and ensure a noiseless night's sleep. Thus, you will not suffer with every movement when surfaces meet.

Frequently Asked Questions

Why does my bed squeak when in use?

The squeaking of a bed can be due to loose fasteners, worn fittings, or uneven loading of the slatted frame. Therefore, check all components and tighten the screws and dowels if necessary.

How can I fix the squeaking headboard of my bed?

A squeaking headboard can be caused by loose fasteners. Tighten the screws or use dowels to securely attach the headboard. Additionally, inserting rubber or felt strips between the headboard and frame often eliminates the problem.

Can a wedge help close gaps in a squeaky bed and reduce the squeaking?

Yes, with a wedge you can close gaps between the components of the bed and thus reduce the squeaking. Place the wedge where the movement and friction occur. In this way, you increase the stability.

Which products are suitable for eliminating squeaky bed models?

Special products such as silicone spray, furniture wax, or candle wax can be applied to the fittings and fasteners of the bed to reduce squeaking. Tightening screws and checking the braces is also advisable, for example.

How does the choice of slatted frame affect the squeaking of the bed?

Choosing a high-quality slatted frame, such as a Bonell slatted frame, can reduce squeaking. Make sure that the slatted frame is evenly loaded and has no loose parts.

What can I do about a squeaky Bonell spring bed?

A Bonell spring bed can squeak if the springs are loose or the frame is not stable. Check the connectors and tighten any loose screws. At the same time, felt strips between the contact areas of the springs and the frame can help.

Which fittings should be checked to prevent squeaky beds?

Check all screws, anchors, and metal fittings of your bed, especially at the joints. Loose or worn fittings are sometimes the main reason for squeaking noises.

Are there any actions or tips for reducing squeaky beds in the room?

A simple tip for less squeaky beds is the regular maintenance of all connectors and fittings. Additionally, keep the room dry and well-ventilated to prevent wood warping. Use felt or rubber strips to avoid direct wood-on-wood contact.